By 
Your business will cripple in the absence of electricity. You need to be knowledgeable about the electrical system and how to install it on your business premises. You cannot proceed with the installation process if you do not understand what you need for the procedure. So, here is a checklist of what you should have when preparing to install your electrical system.
Electrical Service Connection
Your power for business comes from the main power supply managed by the service provider. Without this component, you probably don’t have any power for your business premises. The electric company connects this component to their feeders and installs a meter to monitor electricity use.
Disconnect Switch
You will need to mount the disconnect switch close to the meter. This component is essential for safety purposes within your business. If a fire or flash floods erupt, you can shut the power off and prevent an impending disaster from spreading into your building. Also, it allows you to transfer switch from the live power to standby power generator and vice versa.
Main Breaker
This service panel is used to control the power passing through the system to your business premises. Depending on how much electricity your business utilizes, the breaker could take in anything between 100 to 200 amps. It is important to verify how much power you use before installing the main breaker.
Main Service Board
The main service panel receives electricity from the meter. There are connections inside the breaker box that plug large screw terminals to complete the connection.
Branch Circuit Breakers
The electrical language may be ambiguous on paper, but it may not be as difficult practically. We also have the branch circuits that fill the panel and are usually located under the main breaker. Every breaker epitomizes a switch that controls the flow of electricity to every assigned branch circuit. These breakers are connected to specific circuits in the premises. If you turn off a breaker, all appliances and machines connected to that particular circuit will go off.
Switches
Switches are gadgets that turn off and on the lights in your building. They are available in many designs and styles to suit clients’ preferences. It is important to involve an electrician to help you choose the best switch for every circuit.
Outlets
You will use outlets to plug devices into electrical connection. Computers, televisions and coffee makers are some examples of devices you can plug into outlets to charge or run them.
Wiring
Cables are the main components in the electricity system used to carry current from the panel to the outlet and eventually to the device. You might want some expert advice from an electrical contractor on the best cables in the market.
The piece sums all you need to complete an entire electrical system. The electrical system is more than just a bunch of cables intertwined in between walls. You may consider involving an expert for proper installation.
Comments